Quick Answer:
The first screen of Sentrient’s AI Course Builder asks you to create from scratch or import a document you already have. Starting from scratch suits a genuinely new topic, since a short set of AI-guided questions does the job a training-needs analysis normally does. Importing a document suits a topic you have already written down somewhere, an induction pack, a policy or an old training manual, since AI uses it as real source material instead of a blank brief. Either way, you set the course name and description in the same step, and everything that follows is identical.
In this guide
- Why does this first choice matter more than it seems?
- What do you get if you start from scratch?
- What happens when you import a document instead?
- Create from scratch or import a document: which fits your situation?
- What if your document doesn’t cover everything?
- What happens after you make your choice?
- Frequently asked questions
This guide breaks down exactly what each starting point gives you in Sentrient’s AI Course Builder, so you can make the right call in the few seconds the wizard actually gives you to decide.
Before you write any course content, the wizard asks you to choose: create from scratch or import a document. It may seem like a minor decision, but it determines the source material used to build the rest of your course.
Why Does This First Choice Matter More Than It Seems?
Both options appear in the first step of the wizard, where you also enter your course name and a short description. Whichever you choose, you can generate a complete course with sections, screens, images and an assessment in one to three minutes.
The difference is the source material: AI works from either your brief and answers to guided questions or the content of an existing document.
Your starting point does not lock you into the result. Every screen can be edited after the course is generated, so if something is not quite right, you can adjust it without rebuilding the course.
Choosing the right starting point simply saves time: the closer your source material is to your training needs, the less editing you will need to do afterwards.
If you are working out how to create training materials for your team, or searching for how to create an online course for staff, this is the decision that sets where the material comes from.
What Do You Get If You Start From Scratch?
Starting from scratch means typing a course name and a short brief, then answering a handful of AI-guided questions before the course generates.
Those questions are effectively standing in for a training-needs analysis, the kind of scoping conversation a business would normally have with an instructional designer or an external consultant before a course gets written.
Why the Scoping Step Is Where Most of the Delay Lives
That matters more than it sounds, because that scoping step is usually where most of the delay lives. Chapman Alliance’s widely cited industry survey found that a single hour of finished e-learning takes around 79 hours to develop by hand, a large share of which is planning and structuring content before a single screen gets built.
Starting from scratch in AI Course Builder compresses that planning stage into a short question-and-answer exchange instead of a multi-week scoping process.
When Starting From Scratch Is the Better Choice
This is the better starting point when the topic is genuinely new, when nothing about it exists in writing yet, or when what you do have is too thin to be useful as source material, a couple of dot points, an old slide deck with barely any text on it, a verbal explanation someone gave you once.
In those cases, a document would not save you much time anyway, since AI would still be doing most of the work from your answers. If you do have solid written material, import a document instead.
What Happens When You Import a Document Instead?
Importing a document means uploading a document you already have, an induction pack, a policy, an old training manual or a set of onboarding notes, so AI can use its content as the source material for the course, rather than working from a brief alone.
This is the better starting point when the information already exists somewhere in your business and simply is not in a training format yet.
Turning Existing Documents Into Training
The Australian HR Institute’s March 2026 Work Outlook found that 60% of Australian employers plan to increase their investment in skills and training over the next 12 months, compared with 37% two years earlier.
Yet many businesses face a familiar challenge: they already have policies and process documents, but lack the time to turn them into training courses. Sentrient’s AI Course Builder helps bridge that gap by turning existing content into a course a new starter can complete. It is often the quickest answer to how to create training materials from what you already have.
Which Documents Can You Use?
Sentrient’s AI Course Builder page does not commit to a specific list of accepted file formats, so if you are unsure whether a particular document will work, the safest approach is to try it with what you have and review the result, rather than assuming it in advance. The more complete the file, the more you gain when you import a document.
Still not sure which one fits your situation? The short version: if it is written down somewhere, import it. If it is not, start from scratch and let the guided questions do the work. See the full breakdown.
Create From Scratch or Import a Document: Which Fits Your Situation?
A few common starting points, and which one tends to save the most time. Use it to decide whether to create from scratch or import a document before you open the wizard.
| Your situation | Better starting point | Why |
|---|---|---|
| You already have a written policy or induction pack | Import a document | Gives AI real, business-specific content to work from instead of a general brief |
| You are building training on a brand-new topic, with nothing written down | Start from scratch | The guided questions do the scoping work a document would otherwise provide |
| Your only “document” is a slide deck with a few dot points | Start from scratch | Too little content gives AI little more to work with than a blank brief |
| You want the course to reflect your existing wording and specifics | Import a document | The source document anchors the detail of what gets generated |
| You genuinely are not sure yet | Start from scratch | You can describe what you know as you answer the guided questions |
What If Your Document Doesn’t Cover Everything?
It does not need to. An imported document is a starting point, not a finished product, and the same is true of a course built from scratch. That holds whether you import a document or start with a blank brief.
Once the course is generated, every screen is editable: you can rewrite a description, swap an image, or regenerate a single screen that missed the mark. If a whole section is off, the “describe the changes you’d like” option, paired with a full regenerate, means correcting the course does not mean starting over.
Knowing you can edit the result takes the pressure off your initial choice. An incomplete document does not have to hold you back, and a section that misses the mark in a course built from scratch can be revised without starting again.
Both options lead to the same review-and-edit stage, where you refine the content and finish your course.
What Happens After You Make Your Choice?
Whichever path you pick, the rest of the wizard runs the same way, so you never have to relearn how to create an online course depending on where you started.
The same path works whether you chose to create from scratch or import a document, and whether you are building one course or working out how to create a training program across the whole business.
Once you are happy with it, publish the course to your learning management system. If you are still deciding which course to build first, our guide to creating staff induction training is a practical place to start.
Frequently Asked Questions
1. Is It Better to Start From Scratch or Import a Document in AI Course Builder?
It depends on what you already have. Import a document if the content exists somewhere in your business already, a policy, an induction pack or an old manual. Start from scratch if the topic is new or what you have written down is too thin to use as source material.
2. Do I Lose Anything by Starting From Scratch Instead of Importing a Document?
No. The guided questions in the next step are built to gather the same information a document would provide, and both paths lead to the same generation and review process. Starting from scratch just means AI works from your answers rather than an existing file.
3. Can I Still Edit the Course After It’s Generated, No Matter Which Starting Point I Chose?
Yes. Every screen is editable regardless of how the course started. You can rewrite text, swap images, regenerate a single screen, or regenerate the whole course from a description of the changes you want.
4. What Information Do I Need Before I Start Building a Course?
Just a course name and a short description if you are starting from scratch, or a document you already have if you are importing. Both are set in the same first step of the wizard, alongside a few optional settings.
5. Does Starting From Scratch or Importing a Document Change How Long It Takes to Generate the Course?
No. Sentrient’s AI Course Builder generates a complete course in one to three minutes either way. The starting point changes what the AI works from, not how long generation takes.
Ready to Turn What You Already Have Into a Finished Course?
Sentrient’s AI Course Builder works from a document you already have or a short brief, either way generating a complete, editable course with images, narration and an assessment in one to three minutes.
Sources
- Chapman Alliance, How Long Does It Take to Create Learning? (2010)
- Australian HR Institute, Quarterly Australian Work Outlook, March Quarter 2026
- ManpowerGroup, Q2 2026 Employment Outlook Survey
Last reviewed: November 2026
Disclaimer: This article is general information. AI-generated training content is a draft and should be reviewed and verified by your team before it is assigned, particularly where it covers workplace policy, WHS or compliance obligations.
